Standard Controls

AUTOMATION

Standard Controls

Standard Controls includes Pendant, Radio Pushbutton, Transmitter, Receiver, Radio Joystick, Option Available (Mode Dependent), Cab Controlled and Double Joystick with 5-Speed. And we also provides F24-60 series is particular suitable for control of tower cranes, overhead cranes and concrete pumps.

Pendant

Conforming to Standards : IEC 947-5-1, EN 60 947-5-1, IEC 337-1, VDE 0660-200
Impact-resistance double insulated polypropylene, coloured yellow throughout
Approved to UL listed A600-Q600 & CSA A600-Q600
IP 65 ( to IEC 529) protection against ingress of dust and water
Double insulation to class 11 IEC 536
Ambient air temperature range -25?C to + 75?C
Humidity depending on ambient temperature up to 95% RH
Mechanical durability of 1 million operations
Light weight
Dual or single pressure push-buttons
Positive feel switching
Mechanical interlocks on opposite motions
Shrouded rubber sleeve with stepped entry diameter for cable ?8… ?26 mm
Rated insulation voltage 600V conforming IEC 947-1
Slow break contact operation model
Mushroom head emergency stop push-button with positive operation to IEC 947-1
Terminal identification by numbers to CENELEC EN 50013
Short circuit protection 10A or less
Operating rate up to 3600 operations/hour at 5A ( well in excess of crane duty)
Approved by VDE, SEV, ASE, DEMCO, SEMCO and others
Easy to operate ergonomic design with recessed push-button position ( helps prevent inadvertent operation)

Radio Pushbutton

Enclosure IP65
Robust glass fibre reinforced plastic casing
Phase Lock Loop ( PLL)
Both power source and output relays with fuses
Synchronous transmission encoding and decoding
Changing frequency manual/auto
Auto signal searching
No. of functions and parameters setting > 57
No. self diagnostics > 28
No. of alarms > 28
Frequency renage 415 ~ 483 MHz
Operating temperature -30?C ~ 75?C
Relays 10A/250V
ID Code : 32 Bit
Hamming Code =4
Response time = 65ms
Static > 15kV
Surge > 4kV
Field Strength > 10V/m

Transmitter

Compact design
3 stage power indicator
Buzzer / Alarm
Removable key ( waterproof)
Changeable pushbutton symbols
Shock resistant design
Password power on 4 digits
Output power = 10mW
Normal power consumption approx. 40mA
Harmonic = 65dB
Modulation = 2.5kHz

Receiver

Alarm and signal light output
Power source detector
Anti power interrupt circuit
Relay’s contacts detector circuit
Shock resistant
Dual antenna against multi-path reflection
Enhanced watch dog circuit
3 superheterodyne
Frequency deviation tracing circuit
Sensitivity = 110dBm
Adjacent channel restrain > 80dB

Radio Joystick

4, 8 10 or 12 keys. 16 control commands plus 2 emergency stop buttons and power unit safety system.
IP 55 ( NEMA 4) Optional IP65
1 or 2 stage pushbutton
Emergency stops for immediate standstill
Catch release
Linear levels
Optional display on selected models
Customised transmitters
Tandem operations
Rotary switch
3 year warranty on electrical components
Designed with roll bar combining non-tiring operation with safety requirements
Optional code plug facility

Option Available (Mode Dependent)

Rubber protective kit
Optional infrared start up. Crane radio control may only be
activated if there is ?visual contact? between transmitter and receiver. This prevents unattended use of the crane
Time delayed outputs
Programmable outputs
Output checking
Transmitter tilt switch
Explosion protected transmitter
Auto Power Off
Frequency synthesizer
UHF radio modules with customer selectable frequency
Tandem operation
Handover facilities
Frequency scanning
Safety interlocking via code pugs
Data feedback to transmitter
Programmable joystick output curves ( analogue systems)

Cab Controlled

Open cab or fully glazed with toughened glass
Fixed or opening windows
Fixed to structure or traversing with crab unit
Power Sockets
Fully adjustable seating
Air Conditioning
Heater
Internal Lighting
Load Displays
Choice of joystick or radio controls
Emergency escape harness

Joystick

Double Joystick with 5-Speed

F24-60 series is particular suitable for control of Tower Cranes, Overhead Cranes and Concrete pumps. This particular model is equipped with most sophisticate safety features for making the entire operation safe.
Fully programmable relay configuration with maximum 16 relays output per command.(No extra extension unit required).
Durable nylon-fiber housing for extra shock resistance.
Operating range up to 100 meters.
Pre-wiring standard cable making wiring procedures easier.
New waist belt provide maximum comfort for operator(Optional)
3 stages LED battery power indicator.
Acceleration delay time control(Providing smooth moving for multiple speeds cranes)
Safety features:4.3 billion unique ID code/Hamming code/Enhanced watch-dog circuit.